NITOCOAT

FREE samples
Customized advice
Contact us for a larger order

NITOCOAT

116.00775.00

A permanent transparent and colour-enhancing polysilazane coating with a gloss finish. Used on non-porous surfaces like aluminium, stainless steel, coated surfaces, plastic and trespa.

57707



Request a sample

Additional information

Weight 0.1-1 kg
Aantal Liter

0.1, 0.5, 1

Product description

A permanent transparent and colour-enhancing polysilazane coating with a gloss finish. Used on non-porous surfaces like aluminium, stainless steel, coated surfaces, plastic and trespa.

57707

 

Characteristics

-Protection against penetration of graffiti, solvents, greases and chemicals.
-Erosion and corrosion resistant.
-Suitable for many types of surfaces.
-Temperature resistant (up to 250 ° C).
-Recovers colour of weathered surfaces.
-Consumption approx.: 50-70 m2/L.

Instructions

Do not dilute NITOCOAT. Clean the surface with UNICLEAN, UNICLEAN LOW FOAMING or UNICLEAN HIGH ALKALINE (consult your MAVRO international advisor) and then rinse with tap water. Then wipe off with ISOPROPANOL and dry thoroughly. Then apply NITOCOAT with powersponge, microfiber cloth, insertor or HLVP spray at ambient temperature between 10-35 ° C and relative humidity between 30 and 80%. Do not handle near fire or direct sunlight. The chemical reaction time is at a R.V. from 80% about 15 min., Dry after 1 hour, assessable after 24 hours / fully cured after 7 days. Prepare a test to evaluate the result.

Technical data

Colour: transparant

Smell: solvents and ammonia

Specific weight: 0,92 kg/ltr

pH: ca. 10

Contains: ammonia and butylacetaat Flash point: 5°C Boiling point: 124 – 127°C

Processing temperature: minimal 5°C, maximal 30°C.

Number of layers: Apply 1 layer. If necessary in case of heavy sagging in the surface, apply a second layer after 5 – 10 minutes and wet in wet.

Shape: liquid

Dilution: do not dilute

Vos content: classification: i/sg-max 500 g/l, this product contains 430 g/l VOS.

Relative humidity: maximal 80% during processing and drying.

Drying time: the chemical reaction time is at a R.V. from 80% about 15 min., dust-dry after 1 hour, assessable after 24 hours, fully cured after 7 days.

Kupon za popust
Vpišite svoj e-mail naslov in pridobite 5% popusta na naslednje naročilo.
    Naročite se
    DutchFrenchItalian